1) The device which starts data transfer is called
2) The device which interacts with the initiator is
3) In synchronous BUS, the devices get the timing signals from
Timing generator in the device![]()
A common clock line![]()
Timing signals are not used at all![]()
None of the mentioned![]()
Answer : B Discuss
4) The delays caused in the switching of the timing signals is due to
5) The time for which the data is to be on the BUS is affected by
Propagation delay of the circuit![]()
Setup time of the device![]()
Memory access time![]()
Propagation delay of the circuit & Setup time of the device![]()
Answer : D Discuss
6) Which is fed into the BUS first by the initiator..?
7) ____________ signal is used as an acknowledgement signal by the slave in Multiple cycle transfers.
8) The master indicates that the address is loaded onto the BUS,by activating _____ signal.
9) The MSYN signal is initiated
Soon after the address and commands are loaded![]()
Soon after the decoding of the address![]()
After the slave gets the commands![]()
None of the mentioned![]()
Answer : B Discuss
10) In IBM’s S360/370 systems _____ lines are used to select the I/O devices.